Upholstery Tacks
Profiles & Sizes
Upholstery tacks
Tack profiles
- SLANTED POINT or UPHOLSTERER'S TACK
This is the profile I prefer because the point is sharp enough for the tack to hold on its own in fabric or wood when lightly pressed with a finger.
However, the small residual barb tends to catch the fabric a bit too much.
Reference example: RI017P Slanted Point Tacks. Height of 07 mm at Artapisserie.fr
- CYLINDRICAL POINT TACK
I find this profile acceptable; the point is not sharp enough to my taste, but it is an all-purpose profile.
This is often the model you receive when ordering "point" tacks without closely checking the profile.
- HOLLOW or PARISIAN TACK
Personally, I have never gotten used to this profile; it is difficult to set and tends to split fragile wood.
They seem better suited to leatherwork by cordwainers.
Tack sizes
According to Wikipedia, for slanted point tacks:
- The weight is measured in ounces for 1,000 tacks.
- The length is measured in lines (one line = 1/12th of an inch), which is 2.25 mm.
| mm | ounces | lines |
|---|---|---|
| 6 | 2 1/2 | 2 1/2 |
| 7 | 3 | 3 |
| 9 | 6 | 4 |
| 11 | 8 | 5 |
| 14 | 12 | 6 |
| 16 | 16 | 7 |
6 mm tacks are used to secure calico or fabric on narrow rebates.
Tacks of approximately 13 mm are used to hold hessian and padding fabric.
The longest ones are used for webbing and spring lashing.
For the 9 mm, 11 mm, and 14 mm sizes in the table, here are blue steel upholsterer's tacks:
"Upholsterer's Supplies
