The Ramponneau
The upholsterer's hammer
The Ramponneau Hammer
What is it?
The upholsterer's Ramponneau hammer consists of a wooden handle with a head featuring two elongated and narrow faces of different dimensions:
- a circular head made of copper or with a nylon tip for driving decorative tacks from 10 to 14 mm in diameter.
- the other head can be:
- a deer foot shape for removing tacks or upholstery tacks;
- Circular, with a simple or magnetized head to hold the upholstery tack while the hand holds the fabric
The key is balance. Upholstery hammers with sheathed heads offer good mass distribution to support the movement and minimize effort.
For driving decorative tacks, the magnetic bronze nylon tip for Osborne hammer 36 has a magnetized end of 7 mm and a plastic end of 12 mm.
Magnetic bronze nylon tip for Osborne hammer 36
- Magnetized end of 7 mm for placing decorative tacks
- Plastic end of 12 mm
- Head width: 147 mm
How does it work?
- With three hands
- one to hold the tack or nail
- one to hold the canvas or fabric in place
- a third one to handle the upholstery hammer
This system, which requires two brains for three hands, has reached its limits due to coordination difficulties and especially the lack of confidence from the person not holding the striking tool - With a magnetized face that holds the tack and provides the striking force
But this is not without some problems:- if the magnetization is not strong enough, the tack shifts during the striking motion and may accidentally hit the fingers holding the fabric
- if the magnetization is too strong, the tack stays on the face instead of being driven into the wood and, if you do not notice, it accompanies the second strike, which is generally stronger and less precise than the first, which is bad news for the fingers holding the fabric
- Accurate striking of the upholstery hammer and magnetic upholstery tack combination is achieved only through time and practice. A few meters of adhesive bandage.
For a hammer with a magnetized face, the Draper magnetized upholsterer's hammer with hickory handle, 190 g is an example
Draper magnetized upholsterer's hammer
- Magnetized face to hold the tack
- Hickory handle
- Head weight: 190 g
- With manual pointing
If you have chosen the right tack profile, the "bevelled point" upholstery tack, you can point it by hand, then use one hand for the hammer while the other holds the fabric
The drawback is that the fabric can spring back at the moment of striking and throw the tack to unexpected places that a wandering foot will eventually find painfully - With Leon's "galochier" hammer
The tapered head of this hammer allows a move that is difficult to achieve with the round head of the upholstery hammer:
The upholstery tack is held between the thumb and index finger with a gap where the hammer head can slide in to set it. The remaining fingers hold the fabric against the wood.
"Tools of the Upholsterer
